Terra Lumi Start an enquiry

Terra Lumi · Augsburg, Germany · since 2008

European Originals for American homes & gardens

Handcrafted outdoor lighting from small European workshops, most of them not yet represented in the United States. Matched to Tudor Revival, Mediterranean Revival, Colonial and the other American styles with European roots, and shipped across the Atlantic since 2008.

Why source from Europe

The architecture crossed the Atlantic. The workshops stayed.

Tudor Revival, Mediterranean Revival, French Eclectic, Colonial, Beaux‑Arts. The fixtures that belong on these buildings are still made in the same small European workshops, in the same materials, by the same methods, and almost none of them sell into the United States.

Tudor Revival Mediterranean Revival Spanish Colonial Revival Colonial Revival French Eclectic American Foursquare Craftsman Beaux-Arts Art Deco Victorian
26
European workshops

France, Germany, Italy, Belgium, England, Ireland and the Netherlands. Family firms, some of them in their third or even fourth generation.

4,000
Outdoor fixtures

Wall lanterns and sconces, post lights, pier mounts, pendants, flush mounts, path and garden lighting.

100%
Made in Europe

Cast, forged, spun and patinated in the workshops that design them. Nothing in our range is assembled from bought-in components.

2008
Shipping to the US since

Export documentation, protective crating and customs paperwork are routine here, not an exception we make for you.

Hammered copper lantern crown with pierced vents
Hammered copper, seen at the crown of a lantern.
Copper shade being spun on a lathe
Copper spun on the lathe, one shade at a time.
Verdigris patina on a copper lantern top
Verdigris that develops, not a finish sprayed on.

The workshops

A material, a period, a place

A selection from our range. Each workshop has a material and a period it owns, and each one suits particular American architecture.

Hand-forged wrought iron wall lantern by Robers

Robers

Westphalia, Germany

Hand-forged wrought iron, made between hammer and forge. Heavy sections, the marks of the tools still visible, finishes that age rather than fail.

Suits Tudor Revival · English Country · rustic estates and gatehouses

French brass and zinc lantern by Atelier Lumin’Art

Lumin’Art

France

Spun and patinated brass, zinc and wrought iron in the French tradition. Zinc is the characteristic French material, and it weathers to a soft gray no paint reproduces.

Suits French Eclectic · Château and Normandy Revival · formal entrances

Italian patinated brass and copper barn light

Italian barn lights

Italy

Patinated brass and copper, Mediterranean shapes, left to develop in salt air rather than lacquered against it.

Suits Mediterranean Revival · Spanish Colonial Revival · coastal and courtyard

Belgian Art Deco brass wall light by Authent

Authent

Belgium

Belgian Art Deco with a Jules Verne streak, retro-futuristic and machine-age. Brass, cylinder glass, stepped detailing. Genuine period geometry, not a modern pastiche.

Suits Art Deco · Streamline Moderne · 1920s and 1930s apartment and civic buildings

Old Berlin style lantern on an ornamental cast bracket

Schlesische Laternen

Southern Poland

Cast metal in the Old-Berlin and Schinkel manner, with the ornament of the early gas lanterns reproduced intact. Traditional German antique glass.

Suits Greek Revival · Federal · driveways, civic frontages and estate entrances

Industrial enamel pendant light by Bolich

Bolich

Germany

Bauhaus, country house and industrial forms, made since 1908 and known under the Ebolicht name. Enamel, brass, copper and aluminum.

Suits American Foursquare · Craftsman · Prairie · converted industrial

Bavarian handcrafted brass wall light by Munich Lanterns

Munich Lanterns

Bavaria, Germany

Historic brass and copper, handcrafted in small numbers since 1883 by a former supplier to the Royal Bavarian Court. Restrained shapes that carry a porch without dominating it.

Suits Colonial Revival · Alpine and lodge architecture · covered porches

Victorian style lantern with glazed panels

Victorian Lanterns

Ireland and England

Cast and fabricated lanterns in the nineteenth-century British manner, pointed cylinders and glazed panels.

Suits Victorian · Queen Anne · Shingle Style · historic districts

Experience

A specialist shop, not a marketplace

Terra Lumi is a second-generation family business in Augsburg, Bavaria. We have sold nothing but lighting since 2008, and we have been choosing which workshops to represent for just as long.

Hundreds of completed projects

Private residences, hotels and restaurants, retail interiors, and set dressing for film and television across Europe.

Selected projects & references

Façade of the Hackescher Hof, Berlin

Berlin

Restaurant Hackescher Hof

Art Deco wall lights with crystal glass rods for the dining rooms behind August Endell’s 1907 Jugendstil façade.

Copper wall lanterns at the Tannerhof, Bayrischzell

Bayrischzell

Nature Hotel Tannerhof

Bolich, Aldo Bernardi and Berliner Laternen fixtures across a hotel laid out like a small village in the mountains.

Three-flame post light on the harbor terrace, Cologne

Cologne

Chocolate Museum harbor terrace

Three-flame post lights by Schlesische Laternen along the terrace above the Rhine.

Cased wall light on the brick façade of the Gmund paper mill

Gmund am Tegernsee

Gmund Paper Mill

Vitrine 1LN cased wall lights by Authent on the brick façade of a paper mill in family hands since 1829.

Bolich lantern above the station portal, Dresden-Klotzsche

Dresden

Klotzsche Train Station

Bolich outdoor lanterns, Bremen model in copper patina, at a listed station building restored in 2015.

Wall lanterns along the terrace of the Park Hotel Surenburg

Hörstel-Riesenbeck

Park Hotel Surenburg

Outdoor lanterns by Schlesische Laternen along the terrace of a hotel in the Surenburg woodland.

Brass lantern on a hand-forged bracket, Guest House Schiesl

Altendorf

Guest House Schiesl

A brass lantern on a hand-forged wall bracket by Atelier Lumin’Art at an inn trading since 1753.

Brass wall spotlight at the Rügenwalder Mühle

Bad Zwischenahn

Rügenwalder Mühle

Micro-oh brass wall spotlights by Authent, lighting a working mill that carries a hundred-year-old brand mark.

Further references

  • Grand Hotel Villa d’EsteCernobbio, Italy
  • Allianz ArenaMunich
  • New Bellhurst Longhorn RanchTexas, USA
  • Hotel Waldhaus SilsSils Maria, Switzerland
  • BurgtheaterVienna
  • Museum TinguelyBasel, Switzerland
  • Stone InteriorsSan Francisco, USA
  • Schloss FuschlSalzburg
  • Deutsches TheaterBerlin
  • Piazza di Spagna Prestige HotelRome
  • Berghotel SchatzalpDavos, Switzerland
  • Philippe Dard, Architecture IntérieureParis
  • Salzburg FestivalSalzburg
  • Embassy of the Republic of ColombiaBerlin
  • MonteverroCapalbio, Italy
  • Linderhof PalaceEttal
  • Suitenhotel Pirmin ZurbriggenZermatt, Switzerland
  • Bruce Stowell Design ServicesBiddenden, United Kingdom
  • Schloss DrachenburgKönigswinter
  • KaufleutenZurich
  • Boehringer IngelheimIngelheim
  • Lycée ErmesindeLuxembourg
  • Schloss DyckJüchen
  • Universal Music InternationalBerlin
  • Hotel Schloss SonnenburgSt. Lorenzen, Italy
  • Residential villaAbuja, Nigeria
  • Schloss WeissenhausWeissenhaus
  • 25hours HotelsVienna
  • Båsenberga Hotell & KonferensVingåker, Sweden
  • Technisches MuseumVienna
  • NikolaisaalPotsdam
  • PhantasialandBrühl

Working with us

How we work, and what else we make

Our own photography

More than ten thousand photographs taken in house. What you see is the fixture and the finish it actually has, not a manufacturer’s rendering.

One person on your project

Personal consultation in English, by telephone or email. Quotations for complete schedules rather than one line at a time, from the same person throughout.

Interiors as well

The same workshops and the same standard, for the rooms inside. Our interior range has its own shop at Casa Lumi, with more than forty makers.

Before you ask

The questions American clients ask us

We would rather tell you where this does not work than sell you a fixture that fails on site.

Why not just specify an American maker?

Often you should. American workshops do Colonial, Early American and Arts and Crafts better than anyone, because it is their own tradition and they have been at it for generations.

We are useful when the building calls for something they do not make: a French zinc lantern, a Berlin street lamp, Belgian Art Deco, a Bavarian brass porch light.

Do you ship to the United States?

Yes, and we have done since 2008. Fixtures ship from Augsburg in protective crating. You or your contractor act as importer of record, so customs clearance and duty are handled on your side, and we prepare everything your broker needs: commercial invoice, country of origin, tariff classification, weights and dimensions.

On project-sized consignments this is routine for most contractors and freight forwarders, and we handle single fixtures just as readily.

Are the fixtures UL listed?

Most fixtures ship without UL listing as standard. Depending on the manufacturer, a listed or US-configured version may be available on request. We confirm this for each fixture before you place an order.

Will they work on 120 volts?

Fixtures are built to European standard, 230 V with E27 sockets. Some workshops can build 120 V with E26 for the US market. Where they cannot, your electrician fits US components at installation, which is routine work on fixtures of this kind and something our American clients have done for years.

What about wet and damp locations?

Our manufacturers state IP ratings, short for ingress protection. An IP rating is not a US wet-location listing and we do not present it as one. You get the manufacturer’s rating and the mounting conditions the fixture is built for, so you and your engineer can judge it against your own requirements.

How long does it take?

Almost everything is made to order. Typically six to twelve weeks at the workshop, plus two to three weeks in transit. We confirm the current window in writing with every quotation, and we tell you when it moves rather than letting you find out.

Can you make custom sizes and finishes?

Yes, and this is the part most clients underestimate. Custom dimensions, custom arms and backplates, RAL colors and specific patina finishes are ordinary requests for these workshops. Send us the masonry opening or the elevation and we will ask them what is possible.

What happens if something arrives damaged?

Shipments are insured and our packing standard is photographed before dispatch. We hold replacement glass for the fixtures we sell most. One named person handles the claim from start to finish.

Do you work with architects and designers?

Most of our project work is with them. Project pricing, a named contact rather than a form, finish and material samples, custom dimensions, listing status stated per fixture, and quotations within 48 hours. Business accounts are available for repeat project work.

Start here

Send us the building.

An elevation, a specification, or simply a photograph of the house. We come back with a selection across our workshops, including dimensions, finishes, lead times, country of origin and listing status.

No account, no catalog to work through. One conversation about one project.

Browse the full range first